8 sided oil filter tool for new UFI filters

This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters

 1 in stock

Gauze sump filter, retained by ENA95006

 2 in stock

 14152200 GU14152200 14 15 22 00
 1415 2200 1415.2200 14.15.22.00

1 litre of Rotra MP EP80/90 mineral based gear oil for gearboxes and drive boxes

Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. Surpasses API GL-5, MIL L 2105 D, MAN 342 type M1, MAN 342 type M2 (Approved)
Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

 This part is due back in stock soon, call 01484 841395 to reserve yours

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.

 1 in stock

UFI 31 504 00 fuel filter, threaded connections, includes copper washers. See FUA29107 for alternative filter from Mahle

Replace every 6000 miles. Replaces Guzzi refs. 29106060 and 29999660. Only for series 1 Daytona 1000. Will not fit early Cali 3s which have filters with two 14mm threads.

 5 in stock

 29106061 GU29106061 29 10 60 61
 2910 6061 2910.6061 29.10.60.61

Large dust cover for your bike when parked up in your garage. Prevents dust and dirt settling on your pride and joy. Also useful for hiding your bike from prying eyes when your garage door is open. Also see tank protector SIA00001 for extra protection.

Breathable, tear resistant fabric.

 1 in stock